Indian Institute of Science – IISC – Bangalore

NATIONAL: KARNATAKA: SCIENCE & TECHNOLOGLY / VACCINES : IISc Develops Heat-Tolerant Covid-19 Vaccine

A team of scientists has completed pre-clinical trials and is now gearing up for human testing .

India could soon have a new vaccine for the mutating COVID-19 virus to keep the virus at bay. Scientists at the Indian Institute of Science (IISc) have been working on developing a heat-tolerant vaccine that can offer protection against different strains of SARS-CoV-2 which includes both current and future variants. The team has completed pre-clinical trials and is gearing up for the human testing of the vaccine candidate.

According to scientists the evolving nature of the virus and different mutations, they are not sure if the current vaccines can be helpful. Raghavan Varadarajan, Professor at the Molecular Biophysics Unit (MBU) has been leading this research project in collaboration with Mynvax, a startup since the beginning of the pandemic.

After analysing various proteins found in the virus, researchers selected two parts of SARS-CoV-2’s spike protein – the S2 subunit and the Receptor Binding Domain (RBD) – for the new vaccine. The S2 subunit is highly conserved – it mutates much less than the S1 subunit, which is the target of most current vaccines. Scientists have also known that the RBD can provoke a strong immune response in the host. The team created a hybrid protein called RS2 by combining these two components, read a statement released by IISc.

The researchers used mammalian cell lines to study the expression of the hybrid protein. “The protein showed very high levels of expression, and initially I thought that the experiment was not working properly,” said Nidhi Mittal, PhD student at MBU and first author of the study. Further research by Mittal showed that this protein potentially be produced in large quantities.

The team then tested the effects of the protein in both mice and hamster models. They found that the hybrid protein triggered a strong immune response and provided better protection when compared to vaccines containing the whole spike protein.

Varadarajan told TNIE that RS2 has better coverage compared to other vaccines. This could be India’s first homegrown vaccine for the JB.1 variant and others as Covaxin developed for the mutation has become inactive. “Post clinical trials the vaccine can be administered to everyone, starting with healthy human bodies. So far in our animal testing we have not seen any side effects but will have to wait for results on humans,” added Varadarajan.

The RS2 antigen can also be stored at room temperature for a month without the need for cold storage, unlike many vaccines in the market which require mandatory cold storage. This would make the distribution and storage of these vaccine candidates much more economical.

Varadarajan said the vaccine candidate can be tailored to incorporate the RBD region of any new variant of SARS-CoV-2 that might emerge. Its high levels of expression and stability at room temperature can greatly reduce production and distribution costs, making it well-suited for combating COVID-19. “If need be, the vaccine can also be updated as and when the mutation develops over the years,” he added.

source/content: newindianexpess.com (headline edited0

INDIA & KARNATAKA: SCIENCE & TECHNOLOGY / RESEARCH: IISc. Scientists Develop Composite Semiconductor for Next-Gen Foldable Phones and Wearable Devices

Traditional semiconductor devices – such as transistors – are either made of amorphous silicon or amorphous oxides, both of which are not flexible and strain tolerant.

Scientists in the Department of Materials Engineering at the Indian Institute of Science (IISc.) have developed a super flexible, composite semiconductor material that can have possible applications in next-generation flexible or curved display and foldable phones, and in wearable electronics.

Traditional semiconductor devices – such as transistors, the building blocks of most electronic circuits – used in display units are either made of amorphous silicon or amorphous oxides, both of which are not flexible and strain tolerant.

According to IISc, adding polymers to the oxide semiconductors may increase their flexibility, but there is a limit to how much can be added without compromising the semiconductor’s performance.

In the current study, published in Advanced Materials Technologies, researchers have found a way to fabricate a composite containing a significant amount of polymer – up to 40% of the material weight – using a solution-process technique, specifically inkjet printing.

In contrast, previous studies have reported only up to 1-2% polymer addition. Interestingly, the approach enabled the semiconducting properties of the oxide semiconductor to remain unaltered with the polymer addition. The large quantity of polymer made the composite semiconductor highly flexible and foldable without deteriorating its performance.

The composite semiconductor is made up of two materials – a water-insoluble polymer, such as ethyl cellulose that provides flexibility, and indium oxide, a semiconductor which brings in excellent electronic transport properties.

How researchers came up with the new material

To design the material, researchers mixed the polymer with the oxide precursor in such a way that interconnected oxide nanoparticle channels are formed (around phase-separated polymer islands) through which electrons can move from one end of a transistor (source) to the other (drain), ensuring a steady flow of current. The key to form these connected pathways, the researchers found, was the choice of the right kind of water-insoluble polymer that does not mix with the oxide lattice when the oxide semiconductor is being fabricated.

“This phase separation and the formation of polymer-rich islands helps in crack arrest, making it super flexible,” said Subho Dasgupta, Associate Professor in the Department of Materials Engineering, and corresponding author of the study.

Semiconductor materials are usually fabricated using deposition techniques, such as sputtering. Instead, Prof. Dasgupta’s team uses inkjet printing to deposit their material onto various flexible substrates ranging from plastic to paper. In the present study, a polymer called Kapton was used.

Potential use scenarios

Prof. Dasgupta adds that, in the future, such printed semiconductors can be used to fabricate fully printed and flexible television screens, wearables, and large electronic billboards alongside printed organic light emitting diode (OLED) display front-ends. These printed semiconductors will be low cost and easy to manufacture, which could potentially revolutionise the display industry.

The team has obtained a patent for their material, and plans to test its shelf life and quality control from device to device before it can be scaled up for mass production.

source/content: thehindu.com (headline edited)

NATIONAL: KARNATAKA: 02 Bengaluru Institutes among 4 Spearheading National Quantum Mission (NQM)

Research will be carried out by thematic hubs, which are consortiums of research institutions. Each such hub will tackle one among the verticals of quantum research — quantum computing, quantum communications, quantum sensing and quantum materials.

A week after the Union cabinet approved the National Quantum Mission (NQM) at Rs 6,003 crore, several leading experts in the field met at the Raman Research Institute in Bengaluru this week to break down the course the NQM intends to take.

According to a statement, these hubs will “undertake translational research, incubate and support startups, network with industries and international collaborators alongside running outreach programmes.”

Institutes are also likely to drive the functioning of these hubs based on their expertise. For instance, the Tata Institute of Fundamental Research in Mumabi is one of the leading institutes in quantum computing, the Raman Research Institute’s Department of Science and Technology in quantum communications, Indian Institute of Science Education and Research (IISER), Pune, in quantum sensing, and Indian Institute of Science (IISC) in Quantum Material Research.

The Raman Research Institute itself has made breakthroughs recently. After prior success in quantum key distribution (QKD) between stationary transmitters, the feat was replicated with a moving transmitter this year.

Dr Urbasi Sinha of the Raman Research Institute said, “We have been actively working on quantum communications for several years. The goal is to connect the whole country using QKD and satellite-based communication. The NQM will take quantum research and technology to the next level.”

source/content: indianexpress.com (headline edited)

KARNATAKA: GREEN ENERGY /SCIENCE & TECHNOLOGY: IISc Supercapacitor to replace Batteries in EVs

The supercapacitor is fully functional and can be deployed in energy-storage devices like electric car batteries or any miniaturised system by on-chip integration.

Researchers at the Indian Institute of Science (IISc) have developed a new type of supercapacitor that can replace batteries in streetlights, electric cars and medical devices.

The supercapacitor, developed by researchers from IISc’s Department of Instrumentation and Applied Physics (IAP), is different from others, as it is smaller or ‘ultra-micro’, but capable of storing larger amounts of energy. Hence, the supercapacitor can be easier to use in smaller electronic devices, eliminating the need for batteries, while ensuring that the device stays charged for a longer time.

“Most of these devices are currently powered by batteries. However, over time, these batteries lose their ability to store charge and therefore have a limited shelf-life. Capacitors, on the other hand, can store an electrical charge for much longer, by their design. Supercapacitors, on the other hand, combine the best of both batteries and capacitors — they can store and release large amounts of energy, and are therefore highly sought-after for next-generation electronic devices,” the researchers said.

Abha Misra, an IAP professor and a corresponding study author, said the supercapacitor used Field Effect Transistors (FETs) instead of metallic electrodes, which are more commonly used, as charge collectors. “Using FET as an electrode for supercapacitors is something new for tuning charge in a capacitor,” she said.

During their tests, they found that the ultra-micro supercapacitor, due to the materials used, was able to increase capacitance (ability to store energy as electricity within the device) to 3,000 per cent. This was compared to a regular supercapacitor, which showed only an 18 per cent increase. The key was the use of molybdenum disulphide (MoS2) and graphene in increasing the mobility of electrons within the supercapacitor.

“In future, we are planning to explore if replacing MoS2 with other materials can increase the capacitance of the supercapacitor even more. The supercapacitor is fully functional and can be deployed in energy-storage devices like electric car batteries or any miniaturised system by on-chip integration. We are also planning to apply for a patent on the supercapacitor,” they said.

source/content: newindianexpress.com (headline edited)

KARNATAKA: HEALTHCARE / NEUROSCIENCE RESEARCH: Pratiksha Trust signs MoU with Indian Institute of Science (IISc) & Centre for Brain Research (CBR)

CBR is uniquely positioned to take on the challenge of tackling this impending healthcare and socioeconomic crisis.”

The Pratiksha Trust signed an MoU with the Indian Institute of Science (IISC) and Centre for Brain Research (CBR), an autonomous centre of IISC, to accelerate breakthrough discoveries and translational research on neurodegenerative diseases.

Under this MoU, the charitable trust, founded by Infosys co-founder Kris Gopalkrishnan, has agreed to provide support to CBR in perpetuity with an initial outlay to the tune of Rs 450.27 crore over the next 10 years, for research, innovation and translation.

IISC Director Prof G Rangarajan said, “India’s elderly population is expected to grow rapidly to a staggering 32 crore by 2050, leading to a corresponding increase in the burden of dementia and other age-related neurodegenerative diseases. CBR is uniquely positioned to take on the challenge of tackling this impending healthcare and socioeconomic crisis.”

Gopalakrishnan said, “The human brain is one of the world’s biggest mysteries, which is yet to be fully understood. By funding this centre, we are working towards creating and sustaining a globally recognised, state-of-the-art research and innovation hub that will be at the cutting edge of research on the human brain.”

CBR has already been pursuing research in this area and this MoU will help scale up the research and activities at the centre.

It is also a part of nation-wide initiative involving 20 institutions called “Genome-India” (supported by the Department of Biotechnology, Government of India), which aims to discover India-specific genetic basis for diseases through whole genome sequencing of 10,000 samples collected from across the country.

source/content: newindianexpress.com (headline edited)

INTERNATIONAL: HEALTH & MEDICAL SCIENCES / INNOVATION: Ayushi Chauhan, Student of Indian Institute of Science (IISc) Wins Prize for ‘TB Diagnostics Tool’ at the Falling Walls Lab and Science Summit 2022, Berlin, Germany

An IISc student won third prize at an international summit held in Berlin, Germany, for a device that could make tuberculosis (TB) diagnosis cheaper and more accessible.

Ayushi Chauhan, a PhD scholar at IISc’s chemical engineering department, was awarded third prize under the ‘Breakthrough of the Year Emerging Talents’ category at the Falling Walls Lab and Science Summit 2022 in Germany. She was earlier the winner of Falling Walls Lab India 2022, leading her to represent the country during the global summit.

She and her adviser, Dr Bhushan Toley, developed a pocket-sized device for the detection of both regular and drug-resistant tuberculosis, that makes the diagnostic portion near equipment-free. “The device reduces instrumentation cost by 99.6% and testing cost by 87%, which can be reduced even further. Only around one-third of tuberculosis cases are actually reported.

This is due in large part to equipment needs,” she said, during her pitch at the summit. She said the diagnosis method was visually similar to that of a home pregnancy test and Covid tests. “I believe this invention can bring an end to tuberculosis by 2035,” she said.

source/content: newindianexpress.com (headline edited)